High-temperature combined vibration test system "THV-216-A-600 C"
High-temperature combined vibration test system "THV-216-A-600 C" is designed for simultaneous testing of products and materials for resistance to high temperatures and vibrations in a wide frequency range. Structurally, complex consists of two parts, each of which, in turn, is divided into modules and subsystems:
1. High temperature furnace on the hydraulic lift.
High-temperature furnace is designed to stimulate the processes of exposure to high temperatures (from ambient temperature up to + 600 ° C) to the test objects.
High-temperature furnace is mounted on hydraulic lift to enable coupling of furnace to vibration test system in order to perform combined tests of the samples for simultaneous exposure to high temperatures and vibrations.
2. Vibration test system.
Vibration test system consists of electrodynamic shake table complete with magnesium alloy table and control system.
The electrodynamic vibration table includes:
Generator of vibrations, Power amplifier, Air cooling systems of vibration generator, Magnesium expansion table, Vibrotest control system.
Technical characteristics of the heat chamber
¹ |
Parameter |
Value |
| 1 |
Internal volume of chamber Internal size (WxDxH) External dimensions (WxDxH) (approximate) |
216 liters 600×600×600 mm 2200×1150×2400 mm |
| 2 |
Temperature range |
~ +600°Ñ |
| 3 |
Temperature control accuracy |
±0.5°Ñ |
| 4 |
Temperature setting accuracy |
±0.1°Ñ |
| 5 |
Uneven distribution of temperature by volume |
up to 100 °Ñ ≤2°Ñ Higher than 100°Ñ ≤3% of the current temperature |
| 6 |
Average heating rate (without load) |
4 °Ñ |
| 7 |
Heating rate up to +200 ° C (without load) |
35 min |
| 8 |
Hydraulic lift of increased stability. |
|
Hydraulic lift of increased stability.
¹ |
Parameter |
Value |
| 1 |
Dimensions of the vibrator |
850×1300×1150 mm (900 kg) |
| 2 |
Amplifier Dimensions |
1750×550×850 mm (350 kg) |
| 3 |
Dimensions of the cooling system |
1400×850×750 mm (150 kg) |
| 4 |
Expansion table dimensions |
300õ300 mm (12 kg) |
| 5 |
Ejection force (sine) |
10kN |
| 6 |
Ejection force (random) |
10kN |
| 7 |
Ejection force (impact) |
20kN |
| 8 |
Vibration speed, max. |
1,8m/s |
| 9 |
Acceleration (no load), max. |
100 g |
| 10 |
Offset (peak-peak) (no load), max. |
51 mm |
| 11 |
Mass of movable coil elements |
14 kg |
| 12 |
Maximum load on the table |
270 kg |
| 13 |
Diameter of table surface |
240 mm |
| 14 |
Frequency range of the vibrating table |
3-3000 Hz |
| 15 |
Expansion table frequency range |
5-2000 Hz |
| 16 |
Suspension |
Adjustable pneumatic |
| 17 |
Types of tests allowed on equipment |
Fixed frequency, pass through frequencies with a given speed (up-down), search and hold resonance, impact. |
| 18 |
Parameters of vibration control system |
Sine wave Frequency range of tests with a sinusoidal signal: 1-5000 Hz Dynamic range monitoring: 100 dB Control accuracy ± 1 dB Frequency setting accuracy 0.01% Coefficient of nonlinear distortion <0.3% |
Testing format:
- Conducting tests in accordance with customer's test procedure and providing report with the results obtained;
- Conducting tests in accordance with previously agreed test procedure developed by the contractor and providing report with the results obtained;
- Conducting tests with remote online observation of the experiment and correction of operators actions servicing metrological equipment, generating files with the results obtained;
- Order experiment with the physical presence of the customer during the study of samples.
